Home » 2014 Chevy Silverado Changing Oil Guide

2014 Chevy Silverado Changing Oil Guide

It’s a dirty job, but someone has to do it. Changing the oil in your car is one of those things that you should schedule as regularly as possible, and change with the seasons. With all of the different makes and models on the market these days, this can be a daunting task for even experienced mechanics. That’s why we’re going to give you step by step instructions on changing oil in the 2014 Silverado!

2014 Chevy Silverado Changing Oil Guide

2014 Chevy Silverado Changing Oil Guide [hide]

2014 Chevy Silverado Oil Type


The 2014 Chevy Silverado has a six quart capacity for oil. This is the recommended amount of motor oil to use when changing your engine’s lubricant in order to keep it running smoothly and efficiently, as well as preventing other problems from occurring that could lead to an unnecessary or expensive repair down the line.

The 2014 Chevy Silverado has two engine options: the Vortec 6000 and Duramax Diesel.

The engine oil should be rated SAE 0W-20 for models equipped with the 5.3L V8 or 6.2L V8, and with a rating of SAE 5W-30 for engines that have the 4.3 Litre engine, 2 Litres engine, or 6.6 liters installed. To ensure maximum efficiency in your Chevy Silverado 1500, be sure to use engine oil within the range of SAE 0W-30.

2014 Chevy Silverado Oil Change Intervals

The Chevrolet Silverado 1500 recommends an oil change every 15,000 miles with normal driving conditions which would mean that you should change your 2014 Chevy Silverado oil at least four times per year! If you live in cold climates then those changes will need to happen more often than if you drive in warm climates.

Vehicles have a computer that calculates when to change your engine oil and alerts you when it’s time. This isn’t based on miles, but rather how many revolutions the engine makes and the temperature. The time between oil changes will vary depending on how much you drive your vehicle – generally up to 3,000 miles (5,000 km) if it’s been a while since the last visit. You might see the indicator come on before this if you have more difficult conditions for maintaining your car. Never drive your vehicle more than 7,500 miles or 12 months (whichever occurs first) without an oil change. Driving in a dusty area? Be sure to change the oil every 3,000 miles and reset the message each time you do.

How to Check Oil in 2014 Chevy Silverado

To check your oil in a 2014 chevy Silverado, you need to open the hood and locate the engine under-panel. This panel is located near the driver’s side front tire on most models of Silverados. Remove this panel by unfastening its three bolts with an 11 mm wrench or socket set. Once it has been removed, look for two metal lines that are connected to hoses at one end.

The first thing you need to do when checking the oil in your 2014 Chevy Silverado is open a door and then locate the dipstick. Pull it out of its tube, wipe it with paper towel or cloth if desired, reinsert by hand all of the way. Next remove the protective cap on end and pull straight up until you meet resistance. Once cap is removed check for fluid level and compare to markings from top of window as seen below (Oil Level Markings Comparison):

  • 0 quart Low Oil Alert! – Change Now
  • ‒ 0 quart Normal Operating Range
  • + 0 quarts Good Amounts Of Oil Remaining In System

What Oil To Use for 2014 Chevy Silverado?

Every car has different needs for the type of oil to use, but as a general rule, most cars will need SAE (Society of Automotive Engineers) certified engine oils. These are designated by grade numbers like 30 or 40 and they represent how much viscosity is in your motor oil. If you have an older vehicle with a manual transmission, then you also want to make sure that any oil you buy can withstand higher levels of heat due to friction from gear shifts.

It’s not uncommon for drivers who own trucks such as 2014 Chevy Silverado to opt for synthetic-blend motor oils over conventional ones because these products don’t break down at high temperatures and last longer than other types.

Best Oil for 2014 Chevy Silverado

Oil is one of the most important parts in your engine. It lubricates and cools internal components to prevent power loss, reduce wear and tear, increase horsepower, maximize fuel efficiency, lower emissions and improve overall performance. Changing oil regularly can also help extend the life of an engine because it keeps particles from building up on vital driving surfaces inside a motor’s moving parts.

You can use any conventional motor oil that meets GM’s specifications for 2014 Chevy Silverado 1500 vehicles. Refer to your owner’s manual for more information on what type of oils are recommended by Chevrolet for each specific year and model of car you own such as 2014 Chevy Silverados. Do not mix different types of oil! It’s important to follow manufacturer recommendations strictly because improper lubrication may lead to catastrophic engine failure due to metal parts rubbing together.

GM APPROVED OIL
Mobil 1 Truck & SUV advanced full synthetic motor oil, specially formulated for tough trucks and SUVs like towing and hauling. Provides up to 10,000 miles of comprehensive protection for critical engine parts, stays in excellent viscosity and helps to prevent oil breakdown
GM APPROVED OIL
This motor oil helps to protect critical engine parts for up to 20,000 miles between changes, stopping oxidation from leading to the breakdown of your lubricant and maintaining excellent viscosity.

The factory fill is a “LL” synthetic blend, which GM says meets all current requirements for fuel economy and emissions control. It should be noted that you can use any type of oil in your vehicle but if it doesn’t meet these standards then your warranty may be voided by using this type of oil (although many people have had no problems). If you want to use another grade, talk with your dealer first because they are required to honor the warranty on vehicles. In addition, some oils will void an extended service plan contract so make sure you check before purchasing one from them or elsewhere.

Oil types in Chevy trucks are usually what is called mineral-based oil. There may be some synthetics such as Mobil Synthetic or Pennzoil Platinum, but for the most part it seems like GM has stuck to their guns and offered mostly traditional oils in this truck engine.

Required Tools to Change Oil in a Car

Below is the list of tools you need to change the oil by yourself. Gathering everything you need to change the oil is crucial to the process. You can find oil filters at your nearest auto repair shop or hardware store. They are listed below:

  • Oil Filter wrench. This is either a strap wrench or a socket that fits snugly over the filter head and grips it tightly. Make sure to use one of these two types for safety reasons. If you do not have this tool at home, most automotive stores sell them separately from an engine filter kit
  • Wrench set with ratchets. An assortment of open end wrenches ranging from sizes 12mm through 17mm should suffice to cover all possible nut/bolt fittings on your vehicle’s chassis.
  • Grease gun and enough grease according to manufacturer specifications
  • Safety glasses (just in case).
  • Shop towels (you may use these to clean up any oil spills) .
  • Engine degreaser or power washer .
  • New Oil Filter – make sure you purchase the correct filter for your vehicle’s engine and have it with you when changing the oil. Most filters will come in a sealed packet from the manufacturer, so if this is not available be sure to save all packaging materials that came with each new filter as proof of authenticity.
  • Oil Drain Pan – This should measure at least 12 inches across to accommodate both drain plug openings on most engines without spilling over during the filling process. It’s also a good idea to keep an eye towards future maintenance and invest in a large capacity catch canister which stores old.

How to Change Oil in 2014 Chevy Silverado

When you want to change your oil in the 2014 Chevy Silverado, one of the first things that comes into mind is what kind of oil are you going to get.

Car owners can change their cars’ engines with expert guidance from an automotive service center or through self-service at home. The most important part of any maintenance routine for vehicles is regularly changing the motor oil and filter as well as replacing worn parts before they fail – which would be more expensive than swapping out components when there are relatively few miles on them.

2014 Chevy Silverado Oil Change Light Reset Instructions

Step one: Before changing the oil, raise the front of your vehicle and place it on blocks.

Step two: Drain old oil through the dipstick tube.

Step three: Remove bolt and take off your oil filter (or you can pull it straight out) from engine block area in front of the radiator, clean gasket with a rag if necessary or replace if it looks like its leaking from around either end of the cap where it screws into place onto engine block to make sure no residue from old oil remains on new sealant that will be applied next. Do not forget this step as even slight amounts have been known to cause leaks which are difficult to track down sometimes! Cleaning is important for both prevention and quality assurance reasons.

Step four: Replace the oil filter. The oil filter is in the recess on the driver’s side of the engine. The oil filter will be difficult to reach in your 2014 chevy Silverado, so find an oil filter wrench before beginning. After you remove the filter, clean where it screws onto the oil pan and make sure there is no old seal left on.

Step five: Add new oil to the engine. Fill the engine with new oil in your 2014 chevy Silverado. Make sure you fill it to the “Full” mark on the dipstick or a quart over if that is what was recommended by the manufacturer for your car’s make and model.

Step six: Replace filler plug and filter cap. The final step before starting up your Chevy Silverado again is replacing both of these parts, which are found at opposite ends of where you unscrewed them from originally (driver side). The filler plug screws into place just like any other screw would on a piece of furniture, while the air cleaner should be replaced as well – but only after testing its seals using an O-ring tester kit first!

Under your truck, look for leaks and reset the “oil life” display to 100%.

Add comment