If you’re a car enthusiast, chances are that at some point in your life you’ve learned how to change the oil yourself. You may have even been lucky enough to find an old beater of a car and keep it running for years just by changing its oil on your own! But what if there was a time when you needed a new place to live and couldn’t afford an expensive vehicle? What would happen if this happened now? If so, then I’m going to show you step-by-step how to do it with the help of my 2013 Subaru Impreza. So without further ado, let’s get started!
2013 Subaru Impreza Oil Change Guide [hide]
2013 Subaru Impreza Oil Type
You shouldn’t forget that it is always best to consult your vehicle’s owner’s manual for specific instructions on how to change the oil in your particular model. Let’s get started!
The 2007 Subaru Impreza 2.0 L uses SAE 5w-30 full synthetic oil.
2013 Subaru IMPREZA 2.0L 4-cyl Engine takes 5.1 quarts with the new filter.
SPECIFICATION OF OIL
Subaru highly recommends using Subaru Synthetic Motor Oil. It was designed to help Turbo-charged engines withstand these conditions and prevent problems. While Subaru Synthetic Motor Oil is recommended for Turbo-charged engines, it offers excellent performance for all engine types.
HIGH MILEAGE OIL FOR 2013 Subaru Impreza
It is always a good idea to go for highly trusted brands. One of the best high mileage oil brands is Mobil 1 High Mileage full synthetic motor oil. It is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.
2013 Subaru Impreza Oil Change Intervals
Subaru suggests that you change the oil and filter on your 2013 Impreza every 3,000-5,000 miles. However it is best to get this done with a professional mechanic or at an auto dealership as there may be different requirements for each individual model depending upon its make and year of manufacture. Keep up with the recommended intervals and you should have a reliable vehicle.
Best Oil for 2013 Subaru Impreza
We will help you with choosing the best oil for your 2013 Subaru Impreza. Don’t forget to follow the manufacturer’s recommended change intervals will help keep your car running smoothly.
However, if you choose to change the oil yourself, be sure to use the correct type of oil and follow the proper steps. We can help you with that!
Oil (by manufacturer) – Subaru recommends using Genuine Subaru Oil – 0W20 Synthetic. 2013 Subaru Impreza 0w-20 weight motor oil which is a synthetic blend oil.
Oil (our choice) – Pennzoil – Ultra Platinum Full Synthetic 0W-20 Motor Oil for 2013 Subaru Impreza is safe to use. It can provide better gas mileage, engine protection and performance for your 2013 Subaru Impreza engine.
Oil filter (by manufecturer) – If you are looking for which oil filter is perfect for your 2013 Subaru Impreza then check out this Genuine Subaru Oil Filter.
How to Change Oil by Yourself – Step by Step
The Subaru Impreza is a car that has been loved by many drivers. It’s easy to maintain and doesn’t require much effort, so it’s perfect for those who are looking for something simple. However, the oil needs to be changed every 5,000 miles or less depending on how you drive your vehicle. This blog post will show you how to change your oil yourself in just few steps!
Let’s get it going. First thing we’re going to do is get this on the lift. So actually, for a lift, we’re going to use this right around.
And to change the oil in a Subaru or any other car for that matter, we need to identify four things before starting with the oil filter is and on this car, it’s super easy. We need to know where the dipstick is. And we need to know where the oil intake is. In the fourth one, we need to know where the oil drain plug is. And the first and the most important thing we need to identify with oil intake is not the drain like we always start with intake, we want to make sure that we can open get to it, open it and be able to get new oil once we drain the whole thing.
Now get to a drain plug. Let’s get this. The easiest way to find a drain plug in a Subaru is you start with the with the middle of the car where the license plate the front license plate is and you draw a line straight in the center. And you find your your drain plug in would be the first opening here. And your drain plug is here and it is 17 millimeters.
Firstly, we’re going to break this open like this. We’re going to get the oil tray ready to gauge the oil. And slowly applying the inward pressure, unscrew the plug and even can lift the tray and you’ll feel it’s kind of hot. So have to be careful. We ran the car just a little bit. And one quick motion to cage the whole thing and nothing is filled. Alright, and we’re gonna let it drain all the way. And we’re gonna proceed to the top of the car. The drain plugs out and it’s draining. To end to get a drain faster, we want to undo the oil cap.
And also we want to pull the dipstick out just a little bit. And now it’s going much faster. All right, so while this whole thing is raining, we can take care of the oil filter.
There are claims that you can actually do remove it by hand. You can have a little tool from craftsmen. It’s oil filter removal to adjustable oil filter removal. Then we remove the rest by hand all the way.
We want to clean this up a little bit just to make sure there’s no debris or dirt. And this is all it takes. So next we’re going to prep the oil filter. We got this synthetic oil, it is 0W-20, this is what this car requires.
All that’s left to do is actually pour some oil inside the oil filter. And make sure to get some oil on this rubber gasket. And this will guarantee that the oil filter will not cease to the engine next time we want to remove it.
Now we’re going to install the drain plug. So we’re just going to reinstall it.
Alright, and the next step is to fill this car with oil. And the only thing we’re going to need is this funnel. So let’s do this.
Now we’re gonna drive off the ramps super carefully and slow. Let’s check the oil one last time. And it’s right below the full mark.
Alright, so that is it. That’s how we change the engine oil in this Subaru.