Looking for the best oil additive for your burning oil engine? Does your engine consume oil faster than usual? Then this oil additive guide is for you.
Engine oils aren’t supposed to enter your engine’s combustion chamber and burn with fuel. When it does, then this phenomenon is called burning oil, which means the oil is burning here. It’s a common issue for old cars. And oil additives are one of the easiest solutions to stop burning oil. But how?
In this article we will find out why does a car burns oil, how oil additives work, what are the types of oil additives, how they are used, and what are benefits.
To help you find the best oil additive for burning oil we have made a list of some of the top engine oil additives available in the market and reviewed them.
Click here to skip to our recommended pick!
Our Overall #1 Rated Pick
Lucas Oil Stabilizer
Key Features
- Increases oil life
- Pure petroleum oil supplement
- Controls noise and heat
- Eliminates dry starts and reduce friction
Lucas heavy duty oil stabilizer is a well-known oil additive in high-performance and heavy-duty automotive industries for decades. It increases the lubricity of the oil, thus reduces oil consumption and engine temperatures.
This oil stabilizer stops the leaks by making the oil thicker and stickier, and this is why it is one of the best oil additives to stop smokes.
After adding this additive to an old engine, you will immediately notice the differences. No matter what you have maintained your car well or not, you will get a smoother running experience with protection for your engine.
Not only your vehicle will run cooler but also as quiet as a new engine. If yours is a high-mileage car then this the best oil additive.
It works fine with all types of engine oil. This is our recommended product for any vehicle that needs an oil additive.
Oil Additive for Burning Oil – Buying Guide
Buying oil additives without knowing details about them can be dangerous. It can destroy an engine if you apply the wrong kind of additives. You also have to know about the symptoms that a car gives you. We have prepared this buying guide to help you make the best choice according to your need.
Why Does a Car Burn Oil Fast?
Are you short on time or just want a quick answer?
Check out our list below for a summary of our results.
- LUCAS 10001 Oil Stabilizer
- Archoil AR9100 Oil Additive
- Liqui Moly Pro-Line Engine Flush
- TriboTEX Nano-Oil Additive
- XADO Engine Oil additive
- Bar's Leaks Engine Repair
- Rislone Compression Repair
Oil consumption in an engine may vary with power output and fuel consumption. The engine will consume more oil when it is under heavy pressure. But if your vehicle uses more oil under the same condition, then it is burning oil.
It is necessary to find out the reasons behind the high consumption of oil because it creates air pollution as well as affects the engine system.
Some common reasons for burning oil are:
- Faulty piston ring and cylinder wear
- Defective crankcase
- Worn and leaked valve seals
- Abnormal Turbocharge wear
How to Identify a Burning oil?
A quick check for burning oil is to watch the exhaust gas for signs of burn oil. Now, the engine gives signs of burning oil when it is starting from cold or having an acceleration from a stop. So, when starting the car or accelerating, you will notice bluish or gray smoke from the exhaust if it is burning oil.
How to Stop Engine from Burning Oil
Oil can be prevented in many ways. You can take your car to a mechanic shop to repair your old engine, which will cost a huge amount of money. There’s also an easy fix, which is using a high-quality appropriate oil additive to stop the burning oil.
Mostly, adding additives solves the problem before a more costly repair is needed. These oil additives are specially designed products that will repair internal leaks. They will also help overcome other engine problems.
Oil Additives for Burning oil – Good or Bad?
Certainly, oil additive gives huge benefits for both new and old car owners. Not all additives are for burning oil. Now let’s see what benefits we will get by using these oil additives.
Reduce Engine Friction
Oil additives create a layer between engine parts that reduces engine friction. It restores the lubrication and prevents rust in older engines.
Stabilize Motor Oil
When the oil is too thin when the engine heats up, it can destroy the performance of an engine because there won’t be any layer of oil between moving parts. It makes engine oil thicker and sticker and improves the performance.
Clean Dirt
Oil additive’s restoration and lubrication characteristics remove dirt and sludge buildup in engines.
Stop Smoke
Oil additives seal the leak and prevent engine oil to mix with the fuel. Thus, it stops oil loss and excessive smokes.
For Compression
The thickening characteristic thickens the layer on fatigued spots within the engine compared to less-worn spots. It helps to preserve the interior design of your engine. Restoring the original designs makes your engine work more efficiently and the compression ratio increased.
For Oil Consumption
Oil additive for burning oil provides a flexible seal between the faulty cylinder walls and piston rings, worn and leaked valves, and other weak areas which prevent oil leaking and reduces oil consumption.
Mostly, oil additives won’t damage your vehicles’ engine. However, don’t take these additives to be a miracle solution to get rid of your car’s problems either. The best option would be to consult with a specialist, as you begin to experience symptoms.
How to Use Oil Additives for Burning Oil
These oil additives can be added at any time. For best output, it’s best when added to fresh oil right after an oil change and in a warm engine. And it is recommended to use oil additives once per oil change.
When using a specific oil additive in a new car, check the user manual to check whether it violates their warranty or not.
Though most car manufacturers discourage not using any oil additives, they produce their additives. They do that mainly to make sure that you don’t damage the engine by adding the wrong additives.
Best Oil Additive for burning Oil
A huge number of manufacturers provides a wide range of choice for oil additives, and all of them has positive and negatives side. This can create confusion and can lead to the wrong product especially those who don’t shop their engine oil product often.
Find the list below for some of the best oil additives for burning oil in 2021.
The top best product [hide]
LUCAS 10001 Oil Stabilizer
This oil stabilizer stops the leaks by making the oil thicker and stickier, and this is why it is one of the best oil additives to stop smokes.
After adding this additive to an old engine, you will immediately notice the differences. No matter what you have maintained your car well or not, you will get a smoother running experience with protection for your engine.
Not only your vehicle will run cooler but also as quiet as a new engine. If yours is a high-mileage car then this the best oil additive.
It works fine with all types of engine oil. This is our recommended product for any vehicle that needs an oil additive.
Archoil AR9100 Oil Additive
It also plays an important role in removing oil sludge and extending oil life. I wouldn’t recommend storing it for a long time in the garage.
Liqui Moly Pro-Line Engine Flush
Liqui Moly Pro-Line Engine Flush">
The cleaning should be done before an oil change. Let the engine run at idle speed for 10 minutes. Drain oil, change the oil filter, and then refill with Liqui Moly engine oil with a specified amount. This is fully compatible with all types of engine oil and doesn’t have any temperature issues.
TriboTEX Nano-Oil Additive
Bearing in engines will wear with time and it is responsible for making the noise and burning oil, this oil additive will silent those completely.
When added to engine oil, the nanoparticles in the additives attach to metal surfaces, particle by particle. After you drive for around 500 miles, a carbon (DLC) diamond-like coating forms that reverse wear and repair bearings.
Once added it will last multiple oil changes and is compatible with any kind of engine worldwide.
XADO Engine Oil additive
It Increases engine life and overloading capacity. And usually, one treatment lasts for 50 -60,000 miles.
Bar's Leaks Engine Repair
As a result, it will increase both the power and compression of the engine. If you are looking to fix much of the engine's problem with only a few dollars, Bar’s leak repairing might be the right choice.
It is very easy to use, needs no special expertise and you will see the result very soon.
Rislone Compression Repair
Rislone liquid technology with ring seal renews worn engines restores lost power, rebuilds compression, and repairs engine blow-by.
This liquid in a bottle works by freeing sticky piston rings and filling grooves in cylinder walls, eliminating blow-by and compression loss. And also reduces friction.
It works fine with synthetic and high mileage oils as well as conventional motor oil. It has to be applied with every oil change.
