Time to change your oil? With a 2016 Jeep Cherokee, you can save yourself some money by doing it yourself. While the procedure may not be as simple as changing your own oil in a regular car, it’s still pretty straightforward and will only take about an hour of your time. Follow this step-by-step guide from our mechanics on how to change the oil in your Jeep Cherokee without having to visit the dealership. We recommend checking out this article for other helpful guides like replacing spark plugs or installing new wiper blades.
2016 Jeep Cherokee Oil Change Guide [hide]
2016 Jeep Cherokee Oil Type
Before changing oil in your 2016 Jeep Cherokee check owner’s manual for required oil type and viscosity and find out the manufacturer’s recommendations.
VISCOSITY GRADE
The 2016 Jeep Cherokee uses two different viscosities of full synthetic oil. The 2.4L 4-cylinder engine runs on SAE 0W-20 motor oil, with a new filter for maximum efficiency in any conditions; while the 3.2 V6 prefers using only high quality SAE or API certified oils of 5W-20 viscosity that are made to last longer under varying temperatures.
The 0W or 5W refers to the pumpability in cold temperatures. Therefore, a 0W would flow more easily than a 5W and could be an acceptable substitute. Thus, it is suitable to use a SAE 0W-20 as a replacement for SAE 5W-20 application.
CAPACITY
Use 5.5 quarts of oil for 2.4L 4-cylinder engine and 6 qt for the 3.2L engine. Both engines preferred oil type is an SAE 5W-20 synthetic blend.
SPECIFICATION OF OIL
Yet, Pennzoil is the only motor oil recommended by the Jeep brand in North America. But you can always use an equivalent motor oil for your 2016 Jeep Cherokee as long as it has the proper weight.
HIGH MILEAGE OIL FOR 2016 Jeep Cherokee
It is recommended to use Pennzoil High Mileage Oil for 2016 Jeep Cherokee, but you can also use other trusted brands as Mobil 1 High Mileage full synthetic motor oil 5W-20 which is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes, or Valvoline.
2016 Jeep Cherokee Oil Change Intervals
An oil change is one of the most mandatory and lanky services for your vehicle. Oil changes should happen at least every 3,000 miles with conventional oils or 7500-10000 depending on what kind you use. In many states it’s a legal requirement to have an oil change completed at least yearly.
Many vehicle manufacturers offer free or reduced rate service for the first year, but after that you will be responsible for the costs.
In this article you’ll fing a full guide that is going to show how to do a basic oil change in your 2016 Jeep Cherokee. It’s important to do a oil change at least once a year to ensure the vehicle’s peak performance. If you take good care of your Jeep, it will take care of you.
Best Oil for 2016 Jeep Cherokee
Choosing oil for 2016 Jeep Cherokee you need to know what kind of engine you have and then choose the oil accordingly. It is advised that you always match viscosity level with your car’s manufacturer needs to prevent any damage or harm that may come to your vehicle.
Here are a few advised products that may match your car perfectly:
Oil (by manufacturer) – Jeep recommends using Pennzoil – Ultra Platinum Full Synthetic 5W-20 Motor Oil. It is a synthetic blend oil engineered to provide a high-quality base oil.
Oil (our choice) – Shell Full Synthetic 5W-20 Motor Oil for 2014 Jeep Cherokee is safe to use. It can provide better gas mileage, engine protection and performance for your car.
Oil filter (by manufecturer) – If you are looking for which oil filter is perfect for your 2014 Jeep Cherokee then check out this Mopar Oil Filter.
How to Change Oil by Yourself – Step by Step
If you own a Jeep Cherokee, then you know that it is one of the best vehicles on the road today. This durable SUV has been around for decades and continues to grow in popularity among drivers looking for an affordable vehicle with some serious off-road capability. If your 2016 Jeep Cherokee is due for its oil change, this post will show you how to complete the task yourself.
The best part about changing your own oil? You can do it anywhere there’s space! Whether at home or out in the middle of nowhere, all you need are simple hand tools to get started. We have created a step by step guide below so that even novice mechanics can learn how to perform an oil change themselves.
Step 1.
We’re going to change the oil and the 2015 Jeep Cherokee.
Things you may need: grocery store bags, a funnel, an oil drain pan, a wrench with a 13 millimeter on it a coin (you will need some sort of coin for removing the plastic). Also get a plastic sort of facade type of piece on the bottom, some rags, an oil synthetic and the filter.
From front of the car, first thing we’re going to do is take this plastic piece off.
So if you look under, it’s a plastic piece that says oil drain. And here’s the little area where you put your coin.
And then there’s two little tabs here on the front, you just pull it back, then you can pull it out of there and then it’s out of the way.
Step 2.
Now that that’s off, you should be able to see up in there you can see the oil drain plug. So we’re gonna take that off of there now with a 13 millimeter wrench okay, just loosened it with the wrench.
Get an oil pan ready under the plug. Let it all drain out.
Step 3.
So what you need is to do with this one, before you get to the oil filter, so finish up this part because the oil filter is right there so it’s really close.
Put this plug back in.
So take the oil filter plastic piece off, you can see how easy this is right inside there. They’re amazing. So we’re just going to pull that off of there and then put the new one on. Put an old filter into the drainer.
Step 4.
And then here’s the new filter. You just get some oil out of here. Put oil on the seal for oil in the threads. Put it back on there, just get it tight by hand. Not super tight, just real snug on there. Put it back on. And then and tighten it with the coin.
Step 5.
So now the system’s all closed up, ready to put the new oil in.
We put the cap back on. And I use the funnel to put the old oil into the jug which is now empty. Then take the used oil to Autozone to recycle.
Step 6.
The last very last thing to do is to go into the car and reset the oil life meter in the computer, which it tells you how to do in your user manual.
So that’s how you change the oil.
