Home » 2014 Jeep Wrangler Oil Change Guide

2014 Jeep Wrangler Oil Change Guide

Oil changes are something you can do yourself without the assistance of a mechanic. There is no reason to spend money on expensive oil change shops when you can easily take care of this task in your own driveway or garage. This guide will help walk you through the process step by step so that even if it’s your first time changing your Jeep Wrangler’s oil, there won’t be any issues.

This guide will provide information about how to perform an oil change for anyone who owns a 2014 Jeep Wrangler and would like to know how they can save some money by doing it themselves instead of taking it into an expensive auto shop. The steps provided here are easy enough for someone with little experience working on cars or under their hoods.


2014 Jeep Wrangler Oil Change Guide [hide]

2014 Jeep Wrangler Oil Type


Before changing oil in your 2014 Jeep Wrangler check owner’s manual for required oil type and viscosity and find out the manufacturer’s recommendations.


For 2014 Jeep Wranglers with the Pentastar 3.6L engine, Mopar recommends using six quarts of 5W-20 oil for everyday driving conditions, however you can also use 5W-30 depending on what type of driving conditions you expect to encounter.


The 3.6L Pentastar engine needs a 5W-20 oil for proper functioning, and it must be filled up with 6 quarts of that type or your car may not run as smoothly.


The 2014 Jeep Wrangler 3.6L Engine requires MOPAR SAE 5W-20 engine oil or equivalent Pennzoil and Shell Helix are recommended for all operating temperatures, which means you may need to change your fluids more often in hot weather conditions than at other times of year since it’s a little harder on them to keep working properly with high levels of heat going through the car’s systems every single day.

HIGH MILEAGE OIL FOR 2014 Jeep Wrangler

High mileage oils are a powerful multivitamin for your engine, restoring worn parts and preventing further damage. As the seal conditioners within these high-quality blends expand to rejuvenate everything from valves all the way up into rings – less of that important fluids leaks out as you drive down main thoroughfares or through busy city streets.

For 2014 Jeep Wrangler use Pennzoil High Mileage Motor Oil of SAE 5W-20.

In addition to being a powerful vitamin for your engine, High Mileage Motor Oils promote fuel economy and drivability. They reduce your need for motor oil changes and their economic benefits – like reduced wear on taps, washers, valves and oxygen sensors.

Pennzoil High Mileage Motor Oils are compatible with all engine types, including high mileage engines; they protect against the harmful effects of long-term oil breakdown; providing quick protection from friction, wear and deposits – increasing engine durability.

2014 Jeep Wrangler Change Intervals


Changing your car’s oil is one of the most important services you can do for it. Synthetic oils should be changed every 7,500 – 10,000 miles while conventional must get an upgrade after 3,000-5,000 at least. 2014 Jeep Wrangler owners are advised by factory recommends getting their filters checked as well if this has not been done before; plus having new fluids ensures maximum performance from start to finish

A regular service visit will make sure everything runs smoothly with minimal wear on parts like differential gears or other vital components inside each vehicle.

Every vehicle has its own way of working and its best-suited periodical maintenance schedule depending on the year, make and model. Maintaining your 2014 Jeep Wrangler is not only important for its well-being but also to understand how it works, what components require extra care and where you can save money without compromising the quality.

Best Oil for 2014 Jeep Wrangler


Choosing oil for 2014 Jeep Wrangler you need to know what kind of engine you have and then choose the oil accordingly. It is advised that you always match viscosity level with your car’s manufacturer needs to prevent any damage or harm that may come to your vehicle.

Here are a few advised products that may match your car perfectly:

Oil (by manufacturer) – Jeep recommends using Pennzoil – Ultra Platinum Full Synthetic 5W-20 Motor Oil. It is a synthetic blend oil engineered to provide a high-quality base oil.

Pennzoil Ultra Platinum Full Synthetic motor oil is made from natural gas, not crude. It is one of the best full synthetic motor oils in our portfolio. Made for extreme performance, Pennzoil Ultra Platinum outperforms conventional oils in terms of low temperature performance and volatility control.

Oil (our choice) –  Shell Full Synthetic 5W-20 Motor Oil for 2014 Jeep Wrangler is safe to use. It can provide better gas mileage, engine protection and performance for your car.

Our Choice
Shell Rotella Gas Truck engine oil is for gas-powered pickup and SUV owners who want a motor oil that delivers on key benefits including protection for extremes their engines face. Shell Rotella Gas Truck protects and prolongs engine life for all truck and SUV engines, both old and new.

Oil filter (by manufecturer) – If you are looking for which oil filter is perfect for your 2014 Jeep Wrangler then check out this Mopar Engine Oil Filter.

Mopar filters are engineered to the high quality standards of the Ford Motor Company and are recommended by Jeep as the original equipment replacement filter. Genuine Mopar OEM product.

How to Change Oil by Yourself – Step by Step

Change the oil in your Jeep Wrangler, yourself! This step-by-step guide will walk you through everything you need to know.  A few simple tools are all that’s needed for this quick and easy project.  The whole thing should take less than an hour from start to finish, so get ready.

Step 1.

It’s time for quick oil change on the 2014 Jeep Wrangler.

As you’ve already bought all the necessary stuff, get the new filter ready.

First, take off the oil filter cap.

Step 2.

Now we’re going to remove the drain plug under the car with the half inch cover and using your 15 sixteenths.


You may reinstall the drain plug if it’s necessary.

Step 3.

Take off an old filter.



Put the new filter in and don’t forget to lubricate the seals with the new oil.


Step 4.

Now inside the vehicle for the key in the condition turn it to the on position and press the gas pedal three times.

Step 5.

Crank the vehicle and double check to make sure that it actually reset.

You have successfully changed the oil in 2014 Jeep Wrangler. Great job.

Add comment