Home » 2013 Hyundai Elantra Oil Change Guide

2013 Hyundai Elantra Oil Change Guide

The Hyundai Elantra is a popular choice for a vehicle due to its affordability and features. However, like all vehicles, the Elantra needs regular oil changes to function properly and last long. Changing the oil in your car is a necessary task, but it can also be a bit daunting if you’ve never done it before.

This article provides a step-by-step guide on how to change your Hyundai Elantra’s oil by yourself. Doing this simple task yourself can save you time and money at the mechanic shop. Let’s get started!

2013 hyundai elantra

2013 Hyundai Elantra Oil Change Guide [hide]

2013 Hyundai Elantra Oil Type

2013 hyundai elantra oil change

Check the owner’s manual for your 2013 Hyundai Elantra to  see when the next oil change is recommended and the type of oil you need to use. It’s usually based on time or mileage. You can change the oil yourself even if you don’t have any mechanical experience using the right tools.


The 2013 Hyundai Elantra mostly requires synthetic motor oil SAE 5W-20 for all temp, though it varies from your weather conditions and how often you drive the car. And the oil capacity varies by engine.


The 2013 Hyundai Elantra 1.8 L 4-cylinder engine will require 4.2 quarts of motor oil.


Use Quaker State’s Full Synthetic motor oil as it is designed to protect today’s sophisticated engines such as modern turbocharged ones. The company has been the preferred aftermarket supplier in 2005 for Hyundai vehicles and one of their main reasons was because they believed Quakers’ brand had more than 100 years experience built on durability, reliability with a high quality product – just what you would expect from them!

HIGH MILEAGE OIL FOR 2013 Hyundai Elantra

It is always a good choice to pick Mobil 1 High Mileage full synthetic motor oil. You can extend your engine’s life by up to 10,000 miles.

2013 Hyundai Elantra Oil Change Intervals

2013 hyundai elantra oil change

With its intuitive controls, the 2013 Elantra is a fantastic vehicle for any driver. To ensure your engine lasts as long as possible and remains in peak condition it’s recommended that you change out 3-5 thousand miles with conventional oil (or 7K on high mileage models). It may seem like an extra step but when compared against other costs of maintaining expensive cars this small cost can become more manageable very quickly!

Hyundai stresses how easy changing filters or replacing fluids at proper intervals will save time later down road so don’t wait until there are problems before taking care of them – just remember always check owner’s manual first because some vehicles require different routines than others. Just like a personal check up at the doctor, preventive maintenance is key to keeping your Hyundai running optimally.

Best Oil for 2013 Hyundai Elantra

2013 hyundai elantra oil change

Since 2013 Hyundai Elantra is a motor vehicle with a Gasoline Engine that requires 5w20 oil, then this article will focus on the steps to change the engine oil and filter of your car for this weight oil.

If you are not sure what type of oil your engine needs, you can always consult the owner’s manual or contact a technician.

Oil (by manufacturer) – Hyundai recommends using Quaker State Motor Oil, Synthetic Blend 5W-20 2013 Hyundai Elantra uses synthetic blend oil.

Quaker State 5W-20 motor oil is a synthetic blend formulation that helps engines survive daily commutes from high-speed highway operation to repetitive, stop-and-go driving. It maintains the required viscosity from start to finish, providing optimal protection.

Oil (our choice) –  Pennzoil – Ultra Platinum Full Synthetic 5W-20 Motor Oil for 2013 Hyundai Elantra is safe to use. It can provide better gas mileage, engine protection and performance for your Elantra engine.

Our Choice
Pennzoil Ultra Platinum Full Synthetic motor oil is made from natural gas, not crude. Made for extreme performance, Pennzoil Ultra Platinum outperforms conventional oils in terms of low temperature performance and volatility control.

Oil filter (by manufecturer) – If you are looking for which oil filter is perfect for your 2013 Hyundai Elantra then check out this HYUNDAI Genuine Oil Filter.

Hyundai Oil Filters provide better engine performance. Manufactured from top quality components, this is your inexpensive replacement option for your rebuild, repair, and maintenance needs.

How to Change Oil by Yourself – Step by Step

The following article will describe how to change the oil in your 2013 Hyundai Elantra. It is not a difficult process if you follow these instructions carefully. You can save yourself some money by doing it yourself, and this article will help you get started!

Step 1.

Let’s change the oil on a 2013 Hyundai Elantra. If there’s not enough clearance for you, you should jack up the car. Position the jack under a jack point or a body rail. And for safety always use a jack stand when you’re lifting a car. Let’s go to the top of the engine number remove the oil cap. This will help the oil drain better.

Step 2.

Here’s some of the tools and supplies we’ll need: new oil, an oil filter, socket, oil pan, and an oil filter wrench. Let’s go under the car and find the oil drain plug and we’ll put the oil pan under the drain plug. Now we’ll use a socket wrench and a 17 millimeter socket and will loosen the oil drain plug. You can use a longer socket wrench if the oil drain plug is difficult to remove. When the oil plug is loose, remove it by hand and let the oil drain into the oil drain pan. You can let the oil drain for approximately five minutes let’s lower the car to make sure most of the oil drains out of the engine.

2013 hyundai elantra oil change guide

Step 3.

Let’s lift the car again and we’ll go under the engine and we’ll replace the oil drain plug. We’ll use our socket wrench again and we’ll tighten the oil drain plug. Do not over tighten the oil drain plug as this could damage the oil pan.

Step 4.

Now let’s find the oil filter at the bottom of the engine. The oil filter is easily accessible at the right front of the engine. The oil filter is a spin on type and it’s available at most auto parts stores. Let’s get her oil filter wrench and we’ll loosen the oil filter turn the wrench counterclockwise and loosen the oil filter by hand. Make sure to position your oil pan under the oil filter to catch any remaining oil from the oil filter.

2013 hyundai elantra oil change guide

Step 5.

Let’s get our new filter and apply a small amount of oil to the oil filter gasket. Make sure the oil filter mounting surface is clean and install the oil filter by spinning it clockwise. Tighten the oil filter by hand according to the instructions that came with the oil filter. Let’s lower the car and remove our jack Stan and our floor jack.

2013 hyundai elantra oil change guide

Step 6.

Let’s go to the top of the engine and we’ll use a funnel to add the new oil. Check your owner’s manual to see what type of oil to use. For this engine we’ll be using four and a half quarts of a 5W-20 oil. We’ll remove and clean our funnel and we’ll replace our oil filler cap tighten the cap until it clicks check the oil dipstick to make sure the oil level is full.

2013 hyundai elantra oil change guide

Step 7.

And finally check for leaks under the engine. Let’s do some cleanup and will pour old oil into the oil container. Remember to always recycle your old oil and oil filter. Now let’s start the car. Look for any oil warning lights and take the car for a test drive. And that’s an oil change on a 2013 Hyundai Elantra.

Add comment