You drive a Chrysler, Jeep, or Dodge with the 3.6 Pentastar engine and are in need of new oil. You’ve come to the correct spot because this article is a list of the finest 3.6 Pentastar oil available, and you’ll be blown away by the goods on this page.
These oils have been chosen by experts to guarantee that your engine runs at its best. You’ll also keep it looking good. Several of these goods are predicted to provide better fuel efficiency.
- Value for money: 🔥🔥🔥🔥🔥
- Purchase link: Buy your Pennzoil Ultra Platinum Full Synthetic Motor Oil at Amazon!
- Value for money: 🔥🔥🔥🔥
- Purchase link: Buy your Castrol Edge 1598EF Extended Performance Full Synthetic Oil at Amazon!
- Value for money: 🔥🔥🔥🔥
- Purchase link: Buy your Shell Rotella Gas Truck Full Synthetic Motor Oil at Amazon!
- Extra wear protection designed to help keep automotive engine parts like new
- Low-friction formula supports strong fuel efficiency
- High quality additives resist motor oil breakdown in tough conditions
- Added detergents help protect against sludge and deposits
- Value for money: 🔥🔥🔥🔥
- Purchase link: Buy your Valvoline Daily Protection SAE 5W-30 Synthetic Blend Motor Oil at Amazon!
- Meets ILSAC-GF6 requirements
- Protects from deposit build-up
- Reduced burning at LSPI
- 10,000-mile drain interval
- Value for money: 🔥🔥🔥🔥
- Purchase link: Buy your Mobil 1 Advanced Full Synthetic Motor Oil 5W-20 at Amazon!
Is Synthetic Oil Better Than Conventional Oil?
There is no comparison between the two. Synthetic oils made with base oils are of significantly higher quality. They’re also a lot cleaner and last considerably longer. Synthetic oils are also more stable, emit fewer harmful gases, and resist rust and corrosion in the engine. All of this contributes to the vehicle’s long-term viability. Although it costs more than other alternatives, it is well worth it.
Chrysler’s Pentastar 3.6 Overview
The 3.6L V6 from the Chrysler Pentastar is a 60-degree V6 engine. It requires 6 quarts of 5W-20 or 5W-30 motor oil, which is in the middle of low-cost and high-performance engines. It has cast aluminum cylinder blocks and a head that make it lighter and more fuel efficient.
The 3.6 Pentastar engine has been used in a number of Chrysler vehicles since it debuted in 2010 for 2011 model years. It’s had a gasoline engine the whole time, with just minor modifications made in 2016.
Difficulties with the drain plug are not uncommon, especially when it is difficult to remove after long periods of time. It’s also possible that it is frozen in place by any exterior elements such as salt or ice. The 3.6-liter V6 engine has been updated to include a two-stage variable lift and variable valve timing (VVT) technology in 2016. The previous V6 engine was replaced with a new JETTA motor with updated fuel injectors, ignition coils, and intake manifold. Following 2016, this modified V6 engine was installed in the Jeep Grand Cherokee, Dodge Durango, Chrysler Voyager, and Chrysler Pacifica among other vehicles.
The engine’s upgrades have not altered the engine’s capacity or oil compatibility. As a result, the newer version also takes SAE 5W-20 and 5W-30 motor oils. There are no rules regarding whether one should use a full synthetic or a synthetic blend.
A turbocharged Pentastar 3.6, however, has been rumored. That will require different motor oil compatibility and, most likely, full synthetic oil.
Oil for 3.6 Pentastar
You should still consult your vehicle’s owner’s handbook while purchasing a new vehicle because the Pentastar 3.6 engine has seen only minor modifications throughout the last year. Here is everything you need to know before purchasing a new car.
How Much Oil Does a 3.6 Pentastar Take?
The 3.6-quart oil capacity of the 3.6-liter engine is 6 quarts. When performing a basic oil and filter change, however, a 5-quart bottle can suffice. Most oils are sold in 5-quart bottles, so you may use the entire thing. If the oil appears to be running low, you can add a single quart bottle instead of three quarts of new oil.
The recommended interval for your oil change is 10,000 miles or one year, depending on your driving habits and the make and model of your car. The 3.6 Pentastar’s suggested service interval is 10,000 miles or one year. Many drivers, however, replace their oil after 5,000 miles.
It’s up to you if you repair it sooner than 10,000 miles. However, make sure you follow the recommended interval for your vehicle’s model.
How Often To Change The Oil On The Pentastar
Oil should be changed every 5000 miles, according to the rule of thumb. However, that is no longer the case. High-quality refining processes have been developed for oils today than ever before.
Although their benefits are numerous, they don’t last as long and require more maintenance. They’re also less protective of your engine’s internals because they’re thinner. They’re generally cleaner (although some makers spend a lot of time marketing this feature), use higher-quality base oils, and with most of them being synthetic, you’ll get superior performance gains over traditional oils. However, there is always a point at which oil needs to be changed.
Synthetic oils can endure around 10,000 miles, but it’s recommended to change the oil every 7500 miles. Every 5000 miles, you should replace the oil in a blend oil.
You can drive 15,000 miles with Castrol oils. Over time, the oil’s effectiveness diminishes, which is why real-life durations are shorter than the brand’s claims.
It’s important to keep your car in good running order, which necessitates changing the oil on a regular basis. You don’t want to be driving around with ineffective oils. Of course, you may expect pricey repairs as a result.
Overall #1 Best Overall
The originality of the product is on an entirely different side of the oil spectrum, and it arrives first. Unlike all other companies on the planet, this Synthetic Oil by Pennzoil was produced using natural gas rather than crude oil. Because it’s a new kind of oil and is thus very successful, it comes with some fantastic benefits.
The brand’s proprietary gas-to-liquid PurePlus patented technology was used to create this natural gas oil. According to the manufacturer, using this technique, compatible vehicles will enjoy some very bold promises.
With an annual fuel cost of $7,000, this product can save you as much as 550 miles of gasoline. However, when compared to a filthy engine, this is true. All preceding products are considered soiled.
Another advantage of not containing crude oil is that it has good wear protection. One of the most important is the wear resistance provided by this oil. This isn’t a statement, but rather a result of the 5W-30 wear test, which shows that this Pennzoil oil outperforms all others in its class.
A filter replacement should be performed at every oil change. Unfortunately, there is always one to replace, and it was Pennzoil that led the way this time. What this implies in real life is that you’re receiving greater engine protection than ever before, which can’t be achieved with any other product on the market.
Deposits are a form ofoil flow disruption that lowers the engine’s efficiency. As a result, the engine’s performance is hampered. You may notice a loss of horsepower in your automobile as a result of deposit accumulation. This one also prevents this from happening. So, you’ll never have to worry about your car’s engine shutting down due to deposit clogging.
- Gas-to-liquid PurePlus technology
- Best in class wear protection
- 550 miles per annum fuel saving
- Reduced chance of deposit formation
- Can work in extreme temperatures
If the seal has been opened after a year, the bottle should not be sent from Pennzoil. This is due to the fact that those oils have performed poorly. However, the product itself is excellent, and there’s nothing better than that.
The 3.6 Pentastar is an excellent engine on its own. It’s a nice V6 engine. However, to ensure that it continues to perform well and remain healthy, you must keep up with its maintenance and performance. These oils will certainly do so.
Every one of the finest oil for a 3.6 Pentastar on this list has been created to keep your engine in top form. However, the Pennzoil Synthetic Motor Oil is an exception.
It’s safer, less polluting, and more fuel efficient. It’s also my first choice for everyone of you. I’ve also provided a brief purchasing guide at the bottom of this page to assist you with any questions.