Home » How to Change Oil in 2011 Honda Pilot

How to Change Oil in 2011 Honda Pilot

Oil changes are a part of regular vehicle maintenance that every 2011 Honda Pilot owner should know how to do. In this article, we will provide you with the steps on changing oil in 2011 Honda Pilots as well as answering some frequently asked questions about 2011 honda pilot oil change. This is a very useful and informative post for those who need to know more about the 2011 Honda Pilot oil change!
Whether you are a 2011 Honda Pilot owner, or just someone who likes to know the facts about cars, it is important for you to understand how to change oil in a 2011 Honda Pilot. There are many reasons why this is an important topic of discussion. For one thing, changing your 2011 Honda Pilot’s oil will help keep your engine running smoothly and efficiently.
2011 Honda Pilot Oil Change

2011 Honda Pilot Change [hide]

2011 Honda Pilot Oil Type


Honda vehicles require oil that’s usually printed on the cap or dipstick. It will be either 5W-20, 10W-30, 5W-30 or 10W-40. If the type of oil is not labeled on your vehicle’s cap, consult your owners manual for the appropriate kind.

Honda recommends whether a conventional or synthetic oil is the best engine oil for your 2011 Pilot. It’s important to frequently and regularly inspect your engine for signs of oil that has leaked onto the exterior, and replace any light or dark brown oil with fresh motor oil.

HONDA APPROVED OIL
Mobil 1 Extended Performance meets guidelines set by ILSAC GF-6 to help prevent low-speed pre-ignition (LSPI) as well as timing chain wear while keeping your engine clean and reducing fuel consumption.

Honda recommends also using the lighter grade in summer when driving conditions are mild. In severe weather-either hot or mountainous terrain, drivers should use heavier grades of oil instead

The 2011 Honda Pilot requires 4.3 liters (4.5 quarts) of SAE 5W-20 engine oil for a full oil change. Synthetic oils are more common than non-synthetic because they work well in different environments and engines. Note that SAE 5W-20 is thinner than other types of oils.

Note: The 2011 Honda pilot should be tightened to at least 29 pounds-feet (39 Newton-metres) worth of torque.

In order to ensure the best possible performance and lifespan for your 2011 Pilot. Honda recommends a specific type of oil: Quaker State® Advanced Durability™ conventional oil, Pennzoil® High Mileage Vehicle® motor oil, Pennzoil Platinum® Full Synthetic motor oil with PurePlus™ Technology, or Shell Rotella® heavy-duty engine.

HONDA APPROVED OIL
A full synthetic 5W-20 engine oil made of natural gas, not crude, using Pennzoil's patented Gas To Liquid PurePlus Technology.

2011 Honda Pilot Oil Change Intervals


Honda has created a Maintenance Minder system that alerts drivers when it is necessary to change the engine oil. The Honda Pilot, like many other Honda vehicles, is equipped with this system. Electronic displays inform drivers when their vehicle needs service in 10% intervals labeled to 20%. When under 10%, the display scales down to 5%. To view your car’s current maintenance level status, turn on the ignition and press select/reset button until it appears on your screen. When the engine oil life remaining dips below 15 percent, such as when an oil change is required, the maintenance reminder icon (a wrench) will come on every time the vehicle is turned on; also displayed will be the engine oil life remaining and maintenance item codes for other scheduled items requiring service. When the vehicle’s engine oil life remaining reaches 6 percent, drivers will be alerted with a “SERVICE” message and various codes. The notification can be removed by following the information displayed on your dashboard screen.

When the remaining engine oil life is 0%, the system displays a warning sign and reports on your in-dash screen. At this point, you should check your identity with other warning signs that have come on previously. The odometer may display the negative number of miles if maintenance is not performed and the system is not reset. The message will appear blinking if driven more than 10 miles.

If the color is more honey than water, it will pour easily. If your oil looks dark around the filter and shiny black at the bottom, then you should change it. Honda recommends changing oil every 7500 miles. However, if your commute often results in lot’s of dirt roads or stop-and-go traffic then it is best to change your oil sooner to prevent wear and tear.

2011 Honda Pilot Oil Check


Checking the oil in a Honda Pilot is quick and easy. Fill up a container with some new oil, then crack open the cover of your engine to find the dipstick. Dipstick reading: Check to see that the dipstick reads full when checking your oil levels. You also want to check the condition of the oil. If the oil in your Pilot begins to look dirty or smell like gasoline, you probably need an oil change.

If you are noticing that your oil level is extremely low or empty, fill the vehicle up and check it again on the next trip. Your engine might be low on oil and the mechanic may need to top it off before driving.

  1. Getting Started – Prepare for the repair.
  2. Open the Hood – How to pop the hood and prop it open.
  3. Remove Dipstick – Locate, remove and wipe oil dipstick.
  4. Read Oil Level on Dipstick (m/p).

Remove dipstick, read desired what is shown as millimeters on the inside of sidewall of the dip stick then record that reading in either “mm” or “inches” at top left corner of white label adjacent to line on which you make your entries; refer back to page 6 and annotate this entry with m or p. Fill out all columns by hand using pen or pencil only while working from right-to-left column by row from top-bottom within each input.

How to Change Oil in 2011 Honda Pilot


Changing your car’s oil means replacing the old oil with a new one, along with a fresh filter. Between our experience and our transparent pricing, you’ll understand how we work to guarantee your peace of mind. Make sure your Honda Pilot has a full-length article answering common questions with product reviews and useful tips for the type of plug.

It features a 3.5-liter V6 engine and requires 5W40 motor oil per the manufacturer’s specifications. Changing your own oil in your Honda Pilot is an advisable task for those who are comfortable with their car, want to save money on servicing, and have some spare time on their hands. Honda owners should refer to the maintenance schedule for their Pilot. This will teach them about mileage intervals and other timely repairs and checks that should be done as well.

NOTE

We recommend wearing safety glasses and work gloves when working under your Honda Pilot. These substances are harmful to the skin and eyes, so it’s important to take precautions while working near them.

Change Oil in 2011 Honda Pilot: Preparation

Find a flat and level surface in which you can park your Honda so that you may lift it safely. For those looking to lift a car during an oil change, parking on pavement is recommended as it gives the vehicle some room to be lifted for its underside. Car ramps are even better when performing an oil change and are relatively low-cost additions. Warm up your car engine, then lift the car on ramps or jack stands and open the hood. Locate the oil fill cap on valve cover and remove it. It should be stamped with an “5W20” designation. This will create air pockets that allow the oil to drain out of the engine faster.

Change Oil in 2011 Honda Pilot: Draining the Oil

Make sure the 2011 Honda Pilot is safely supported by jack stands or in ramps before crawling under it. With safety glasses on, carefully and thoroughly remove all the necessary parts for the oil change and then put them back together again. Remember to buy new oil from a nearby automotive store with an expert salesperson while you’re at it!Locate the oil pan and remove the oil plug with the catch pan positioned strategically beneath it. While the oil is draining, locate the oil filter. Once you notice a slight trickle of oil to drip, replace and tighten the plug for the oil pan.

Replace an old filter with a new one, making sure to use a wrench. Check if there’s still any rubber on the old filter before placing it back in its housing. Rub a small amount of used oil on the gasket of the new filter. Tighten it by hand alone, using only as much tension as needed to fully depress the gasket into place. Clean up any drips (before you go back under with your car) and then crawl out after changing your own filter so there are no drips for

Change Oil in 2011 Honda Pilot: Refilling the Oil

When changing the oil in a Honda Pilot, use a funnel when pouring. It’s important to fill it near the top of the neck and put on an oil fill cap before start-up for 10-15 seconds. To change the oil level in your 2011 Honda Pilot, first remove the orange dipstick from the fill cap at the vehicle. You need to have about a half quart of oil in your 2011 honda pilot 3.5- liter engine, which takes four and a half quarts of oil. Add the 1/2 quart of oil and recheck the dipstick. Once the right level is reached, remove any nearby items under or in between parts of your car before you lower it back onto its wheels.

Oil Life Reset in Honda Pilot 2011


The Honda Pilot will notify you when it is time for an oil change, and after the service has been completed make sure to reset the Oil Life.

These models will typically display a wrench icon when an oil change is due. Clear the wrench with these steps:

  1. First, identify the location of your “SEL/RESET” button. It may be a stem button on the display near the fuel gauge or it could be located on your steering wheel.
  2. Make sure the ignition switch is on with the engine off.
  3. Pressing the “SEL/RESET” will show you how long your Honda pilot has before an oil change is needed.
  4. Holding the “SEL/RESET” button for 10 seconds will cycle through a few different screens and the words “Oil Life %” will be shown. When the screen blinks, release the button.
  5. Press and hold the “SEL/RESET” stem until 5 seconds has elapsed. When the code disappears, release the stem.

You have successfully reset the oil life to 100%. The wrench light should turn off at this point.

Add comment