Changing your car’s oil is a crucial part of its maintenance, and it’s something you can do yourself to save money. The 2017 Subaru Forester is a great car, but like all vehicles, it needs to have its oil changed on a regular basis. In this blog post, we’ll walk you through the process of changing your Forester’s oil step-by-step. So whether you’re a first-time Subaru owner or just looking to save some money on an oil change, read on for all the information you need.
2017 Subaru Forester Oil Change Guide [hide]
2017 Subaru Forester Oil Type
Check the owner’s manual for your 2017 Subaru Forester to know the oil change intervals. The owner’s manual will also tell you what type of engine oil to use.
2017 Subaru Forester requires 0W-20 viscosity for all temps.
Full synthetic oil is required for the 2017 Subaru Forester. The 2.0L 4-cylinder Turbo engine uses 0W-20 and can hold 5.1 quarts. The 2.5L 4-cylinder uses 0W-20 and also holds 5.1 quarts.
SPECIFICATION OF OIL
Subaru Synthetic Motor Oil is designed to help Turbo-charged engines withstand these conditions and prevent problems. While Subaru Synthetic Motor Oil is recommended for Turbo-charged engines, it offers excellent performance for all engine types.
HIGH MILEAGE OIL FOR 2017 Subaru Forester
One of the best high mileage oil brands is Mobil 1 High Mileage full synthetic motor oil. It is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.
2017 Subaru Forester Oil Change Intervals
Subaru recommends getting your 2017 Forester oil & filter changed every 3,000-5,000 miles. It’s best to check with the dealership for an exact interval that works for you vehicle as this will depend on how often it is driven and other factors such as climate conditions.
Best Oil for 2017 Subaru Forester
The 2017 Subaru Forester is a great car in many ways, but when it comes to oil change interval, you can’t go with the factory-recommended one. Many people overlook this important fact and end up wasting money on poor engine condition or worse – prematurely worn-out engine that requires expensive repair.
Check out the recommended list of perfect oil brands for your 2017 Subaru Forester.
Oil (by manufacturer) – Subaru recommends using Genuine Subaru Oil – 0W20 Synthetic. 2017 Subaru Forester uses 5 quarts (liters) of 0w-20 weight motor oil which is a synthetic blend oil.
Oil (our choice) – Pennzoil – Ultra Platinum Full Synthetic 0W-20 Motor Oil for 2017 Subaru Forester is safe to use. It can provide better gas mileage, engine protection and performance for your 2017 Subaru Forester engine.
Oil filter (by manufecturer) – If you are looking for which oil filter is perfect for your 2017 Subaru Forester then check out this Genuine Subaru Oil Filter.
How to Change Oil by Yourself – Step by Step
In this article, we’re going to show you how to change your Forester’s oil & filter on your own. It’s a relatively easy process and can be done in about an hour or two, depending on your experience level.
So we’re going to do an oil change on this Subaru Forester, what you’re going to need is you’re going to need a tool set. You can grab an oil catch pan right here, and a tool set. And you’re going to need this car when you use 0W-20 oil, synthetic oil. And then on top of that, you’re going to need an oil filter. And then an oil pan crush washer. We’re going to drain the oil first. So, your oil drain plug is going to be located right in the middle of your car. On this car. The oil plug is right in the middle right here, you’re gonna be using a 14 millimeter socket. We’re going to pre loosen it and show you in the next step as I pull and drain this on this car, there’s no cover. This one was open.
So next, what we’re going to do is we’re going to go ahead and put on a new crush washer on the filter and we’re going to put the flat side and it’s a drain bolt, and we’re going to wipe this down and we’re going to re-install the drain bolt next.
So the next step we’re gonna do is we’re going to remove this oil filter right here, and we’re gonna use a set of oil filter removers grasp this and I’m going to slowly planet and there’s going to be oil that’s going to get down in the oil catch. And what I like to do is once we remove it we’re am going to put a rag down there to catch all the old oil.
So whenever we’re going to reinstall a new one, we’re going to put a little bit of oil in this case we use some of the oil from the new oil and we’re going to put a new lubricate outside of this before we install it. Install the filter.
Now we can fill the engine with new oil. Check the level after. Start the car and repeat.