Owning a BMW is an investment and also comes with many benefits such as the high quality of engineering, superior performance and excellent fuel economy. This guide will walk you through how to change your own oil on a 2017 X3 by yourself. It’s easy and only takes about 30 minutes! This process can be done in any season whether it’s winter or summer, but remember that this should not replace your regular maintenance schedule which includes changing the oil every 10k miles or once a year depending on driving conditions.
If you’re looking to save money and do your own car maintenance, this article is for you. You’ll learn how to change the oil on a 2017 BMW X3 by yourself in just four easy steps with pictures included.
2017 BMW X3 Oil Change Guide [hide]
2017 BMW X3 Oil Type
If you’re about to make your 2017 BMW X3 oil change, it’s always a good idea to take a look in your owner’s manual to be sure you have all the required tools, gear and materials for this particular 2017 BMW X3 oil change.
You have to get some information about your car before right choice of the oil type. So, what you need to know is what kind of oil should your car take? It means what viscosity and how many quarts capacity is in your engine’s crankcase.
BMW requires that you use their original engine oil in your 2017 BMW X3. They recommend a viscosity rating of SAE 0W-30 or 5W-30. It is used in the gasoline engines, or an equivalent that meets the BMW Longlife-01 FE rating standards.
2017 BMW X3 2.0L 4 -cyl Engine requires 5.1 gt of oil.
SPECIFICATION OF OIL
Use BMW High Performance Synthetic Oil SAE 5W-30 or 0W-30 viscosity grade. If you are doing your own oil changes between the free maintenance, it is a great idea to keep the engine in top shape.
HIGH MILEAGE OIL FOR 2017 BMW X3
Mobil 1 Extended Performance High Mileage full synthetic motor oil 5W-30 is designed to help extend engine life for high mileage engines of all ages.
2017 BMW X3 Oil Change Intervals
BMW recommends getting your 2017 BMW X3 oil & filter changed every 3,000-5,000 miles. You should check with the manufacturer’s manual for specific recommendations based on where you live and how often they drive in order to get optimal performance from their vehicles.
The BMW x3 has several oil change options, so it important to know what you are doing. Changing your BMW X3 2017’s oil every 5,000 miles is very good for the vehicle and all of its moving parts. This also applies to any car that you use on a regular basis based on how often you drive it. If you don’t change the oil frequently on your vehicle it can cause more problems in the future.
BMW x3 owners have different methods of changing their vehicles oil. All methods are acceptable, however if you follow BMWs own maintenance guide for this vehicle.
Best Oil for 2017 BMW X3
Choosing products for 2017 BMW X3 oil change is not an easy task. You need to know what type of oil you should use, how much, and the interval. But we’ve gathered a few brands that will perform perfectly for your car.
Oil (by manufacturer) – BMW recommends using BMW SAE 5W-30 Full Synthetic Motor Oil. 2017 BMW X3 uses 7 quarts 5w-30 weight motor oil which is a synthetic blend oil.
Oil (our choice) – Mobil 1 Extended Performance 5W-30 Motor Oil for 2017 BMW X3 is safe to use. It can provide better gas mileage, engine protection and performance for your 2017 BMW X3 engine.
Oil filter (by manufecturer) – If you are looking for which oil filter is perfect for your 2017 BMW X3 then check out this Premium Guard Oil Filter, Extended Life Premium.
How to Change Oil by Yourself – Step by Step
2017 BMW X3 oil change yourself is quite easy, if you follow this step by step guide. Keep the following steps, read on further for more details.
So follow on!
On this X3, there is a nice little trap door held on by two bolts, they put this on the skid plate to give you access to the drain plug without having to remove the entire skid plate.
Open the fill cap for venting, then remove the plug. Get ready for an oil catch with a draining pan.
So now on to the next obvious step in the oil change procedure, changing the filter, but not so fast. This engine does not have the filter under the car, it’s actually facing up in the engine compartment. It’s pretty nice and really easily accessible. However, it does require a specialty tool to remove it. But now we know this, so we can prepare and buy a necessary tool.
We can go ahead and install the filter making sure to oil up the seals before installing it. And in an ideal world, we would have the filter removal tool which we could use with a torque wrench to tighten the filter housing to the correct torque spec. But you can also use the pipe wrench to get it.
Now we can reinstall the plug into the oil pan making sure to replace the washer and the plug can be torqued to spec.
Finally, with the filter and the plug re installed, we can fill it up with oil.
At this point, we can check the dipstick to ensure that we have filled it to the correct level.
With the vehicle on a level surface, we can go ahead and turn on the engine and let that get up to temp. At that point we can go into the multimedia settings, go to vehicle info, scroll down to vehicle status, and then click on measure oil level. At this point, we can click on Start measurement, and then we just wait for the status bar to hit 100%.
And it looks like the engine oil is okay.