The 2016 Toyota 4Runner is a large SUV that can get you anywhere in style and comfort. The best way to keep your vehicle running at its best is by doing routine maintenance such as oil changes. If you need help with this, or want to know more about the process, then read on!
This article will teach you how to complete a 2016 Toyota 4runner oil change so you can take care of your car and save money in the long run.
2016 Toyota 4Runner Oil Change Guide [hide]
2016 Toyota 4Runner Oil Type
The 2016 Toyota 4Runner oil change process varies based on the type of engine that is in your vehicle. The most common oil types are full synthetic and semi-synthetic oils which offer better performance under high temperatures. If you want to know what kind of oil should be used for your Toyota, check out these guidelines!
Except for Puerto Rico:
Toyota recommends using engine oil “Toyota Genuine Motor Oil” of viscosity SAE 5W-20 or SAE 0W-20. However, SAE
0W-20 is the best choice for good fuel economy and good starting in cold weather.
For Puerto Rico:
Toyota recommends using engine oil “Toyota Genuine Motor Oil” of viscosity 0W-20, 5W-20, 5W-30 and 10W-30 API grade SL “Energy-Conserving”, SM “Energy-Conserving” or SN “Resource-Conserving”; or ILSAC multigrade engine oil.
And you can use engine oil of viscosity 15W-40 API grade SL, SM, or SN multigrade engine oil.
However, if you use SAE 10W-30 or a higher viscosity engine oil in extremely low temperatures, the engine may become difficult to start, so SAE 0W-20, 5W-20, or 5W-30 engine oil is recommended.
The oil capacity with filter is 6.6 quarts (6.2 liters) whereas, without filter, the capacity is 6.0 quarts (5.7 liters).
SPECIFICATION OF OIL
Toyota Genuine Motor Oil or equivalent meeting the above specification is recommended. If you choose another brand of oil, it should have API certification that is SM/SL (Energy Conserving).
Do not use synthetic oil unless recommended by the manufacturer. Using synthetic oil in an engine that does not recommend it may result in damage to your vehicle.
You can use oil from this list of brands to change your engine oil in 2016 Toyota 4Runner:
Do not use other brands that are not listed here. Other oil types may result in engine damage 2016 Toyota 4Runner.
2016 Toyota 4Runner Oil Change Intervals
Toyota recommends that you have your 2016 Toyota oil changed every six months or five thousand miles, whichever comes first. It’s recommended to change the oil filter once a year.
If you are driving aggressively in dusty conditions for long periods of time, then it might be beneficial to get an oil change sooner than six months or five thousand miles.
Best Oil for 2016 Toyota 4Runner
One of the first things you’ll want to know about your new 2016 Toyota 4Runner is what kind of oil it requires. The good news is that there are several types of oils on the market today designed specifically for use in a 2016 Toyota 4Runner, all with different features and benefits depending on how they are engineered. Here are some essential details regarding which oils work best for this vehicle:
Oil (By Manufacturer) – Toyota recommends using “Toyota Genuine Motor Oil” SAE 5W-20 or SAE 0W-20.
Oil (Our Choice) – Mobil Synthetic Motor Oil 5W-20. Mobil 1 5W-20 is an advanced full synthetic motor oil designed to keep your engine running like new by providing exceptional wear protection, cleaning power, and overall performance. Mobil 1 5W-20 synthetic motor oil meets or exceeds the requirements of the industry’s toughest standards and outperforms conventional motor oils. Mobil 1 technology comes as standard equipment in many different vehicles, including select high-performance vehicles. Mobil 1 5W-20 is a high-performance motor oil for all types of cars where this viscosity is recommended. This includes high-performance turbo-charged, supercharged gasoline multi-valve fuel injected engines found in passenger cars, SUVs, light vans and trucks.
Oil Filter (By Manufacturer) – Toyota recommends using a Toyota Genuine Oil Filter. If you are driving in dusty conditions, then an OEM oil filter can prevent contaminants from reaching the engine. A high-quality aftermarket filter may also be used if it meets or exceeds the filtration performance of the factory part and follows all recommendations provided by the vehicle manufacturer.
How to Change Oil By Yourself – Step by Step
The Toyota oil change is a procedure that you can do yourself at home to 2016 Toyota 4Runner by following these simple steps:
The tools you’re gonna need for this job is:
- 14-millimeter Socket
- your wrench for your filter housing
- Toyota Filter Wrench
- Oil Filter
- Motor Oil
- Oil Drain Plug Gasket
STEP 1: PREP
First, you’re gonna want to jack up the vehicle or put it on some ramps.
STEP 2: REMOVE THE COVER
Once you have the correct tools, remove the cover. There are two bolts on either side that need to come out; they can be removed with a socket set or some ratchet wrenches (depending on preference).
Once the bolts are removed, you should be able to pop off this small black cover.
STEP 3: DRAINING THE OIL
The oil should be drained into a pan that is capable of holding at least five quarts.
The drain plug attracts all the used up fluid so this process will go much faster if you have several people to help hold the pan underneath it while you unscrew it with your wrench or set of sockets (again, depending on preference).
STEP 4: PUT BACK THE DRAIN PLUG
Once the oil has drained, put back the drain plug with your wrench or socket set. Be sure to tighten it properly so you do not have any leaks later on.
STEP 5: REPLACE THE OIL FILTER
Next, you need to replace the oil filter. There will be a black cap that needs to be unscrewed and then you can simply remove it by hand (do not use your wrench for this).
After the cap is off, you can pull it out by hand. There will be a small metal cylinder-shaped filter inside the oil container. You can take this out and replace it with your new one by hand as well.
The new filter should come with a gasket that you can place inside of the oil container so it will create an airtight seal when replaced.
STEP 6: ADD THE NEW OIL
Once the new oil filter is in place, you can go ahead and add your new oil.
You will need to refill it until the maximum line on the container reaches the top of this line. This can be done by pouring the oil through a funnel. You can pour slowly to make sure you don’t overfill it.
Once the maximum line is reached, you can screw on your cap and replace any covers or other parts that were removed earlier in this process.
Make sure to take your car for a test drive before you get too far. This will make sure that the oil is distributed properly and there are no leaks or other problems with it after this process has been completed.
If there are no leaks, that means you have successfully completed this process!