If you own a Honda Accord, then you’ve likely already heard about the hassle of changing your oil. Luckily, we have put together this guide to help make the process easier!
We’ll go over everything from how often you should change your oil, what type of oil to use (and where to buy it!) and even provide some helpful videos that walk through each step in detail.
2016 Honda Accord Oil Change Guide [hide]
2016 Honda Accord Oil Type
Before changing your 2016 Accord’s oil by yourself, be sure to check your owner’s manual for recommendations on oil change intervals and grades of oil.
The 2016 Honda Accord recommends an SAE 0W-20 full synthetic oil in the 2.4L engine and a 5w 20th generation, high performance synthetic for its 3.5 litre V6 counterpart.
2016 Honda Accord oil capacity is 4.5 liters with a change interval of 7,500 miles or 1 year, whichever comes first.
SPECIFICATION OF OIL
According to the Honda Accord Owner’s Manual, you should use Genuine Honda Motor Oil – specifically premium-grade 0W 20 detergent oil with an API Certification Seal on it.
HIGH MILEAGE OIL FOR 2016 HONDA ACCORD
High-mileage oils contain many key nutrients that work to restore worn parts while preventing further damage. For 2016 Honda Accord choose Mobil1 – High Mileage 0W-20 Full Synthetic Motor Oil. It is designed to provide protection for your vehicle’s engine when it reaches 75 thousand miles or more between oil changes. 2/3 of all cars that are driven less than this mileage will require synthetic motor oils; however if you drive 10K+ miles per year on average then we recommend using our high-mileage blend instead.
2016 Honda Accord Oil Change Intervals
An oil change is one of the most common and vital services that you will need for your car. Synthetic oils usually have to be changed every 7-10k miles, but some owners may require them more often than that depending on their driving habits. Honda recommends getting an Accord’s conventional motor oil & filter changed at 3-5K mile intervals in order not wear out any parts too quickly.
Many people may not realize this, but changing conventional motor oil at recommended intervals is better for your car’s engine in two critical ways. First, it helps ensure that your car’s engine will have a longer life span because it keeps sludge & dirt particles away from the moving parts of your automobile. Second, it gives you more time to save money for an eventual rebuild, or other major repairs. Changing conventional motor oil at regular intervals might help improve fuel efficiency by keeping up the cleanliness of the engine.
Best Oil for 2016 Honda Accord
According to the Honda Accord Owner’s Manual, you should use Genuine Honda Motor Oil SAE 5W-20 oil with an API certification of SJ, SH or SG. Do not use oils that have other certifications such as ACEA (and their subcategory “Euro” specifications), which are not recognized by Honda.
The owner’s manual states the following information about engine oil:
- SAE 5W-20 motor oil is recommended for all operating conditions. However, under severe driving conditions, Honda recommends the use of SAE 10W-30 motor oil or a premium brand rated with API service classification SG or higher and a viscosity grade of CD or higher.
- In extremely cold climates it may be necessary to start your vehicle using 2 cycle engine oil, however this is not a normal operating practice. 2 cycle engine oil or automatic transmission fluid may then be used to restart your vehicle. If so, change the engine oil and filter as soon as possible with the recommended grade of motor oil listed above.
Oil (by manufacturer) – Honda recommends using Genuine Honda Motor Oil. 2016 Honda Accord uses 5 quarts (liters) of 0w-20 weight motor oil which is a synthetic blend oil.
Oil (our choice) – Valvoline Full Synthetic Oil for 2016 Honda Accord is safe to use. It can provide better gas mileage, engine protection and performance for your 2016 Accord engine.
Oil filter (by manufecturer) – If you are looking for which oil filter is perfect for your 2016 Honda Accord then check out this Genuine Honda Oil Filter. This filter will maintain the life of your engine by blocking small particles from making their way through.
How to Change Oil by Yourself – Step by Step
Engine oil is important to the longevity of your engine. It’s also easy for things like dirt, which can cause bad smells or other issues with performance in an enclosed system. Regularly changing out motor oil will ensure that you have enough protection against wear so it doesn’t affect how smoothly everything operates while driving down the road. If you want to change oil in your 2016 Honda Accord by yourself just follow these steps:
1. The first thing you need to do is to remove the oil filter cap so the oil drains easier under the car.
Grab your ratchet with the 17 millimeter socket and start loosening the nut.
Let that drain for about five or seven minutes.
2. The next thing you need to do is install new crush washer on the oil drain bolt and put the boat back in. Then snug it down not too tight.
3. So now you need to remove the oil filter.
Before you install the new oil filter, you need to oil the seal around so when installing the new oil filter, it isn’t really necessary to torque it down with a wrench hand tight is good enough.
4. Now the old oil is out and the new oil filter has been installed, so It’s time to add the new oil.
5. When the oil is added it’s better to start the car real quick. Let it run for a few seconds and check the level of oil.
6. Once you’re satisfied with the engine oil level, you can go ahead and put the cap back on.
And it’s always a good idea to check the oil the next day just to make sure that it’s still at the correct level.