Did you know that the Nissan Versa is one of the most popular compact cars in America? Not only can it fit your entire family, but it’s also fun to drive! Now, let’s talk about how you can change its oil by yourself. It might sound daunting at first, but don’t worry – we’ve prepared a step-by-step guide just for you! Read on to learn more.
The Nissan Versa is an incredibly popular car across America because not only does it seat five passengers comfortably, but it’s also sturdy and easy to drive. If you’re interested in learning how to do simple maintenance like changing the oil by yourself then keep reading – this post has all of the information that you need!
2017 Nissan Rogue Oil Change Guide [hide]
2015 Nissan Versa Oil Type
Before changing oil in your 2015 Nissan Versa, take a look in your owner’s guide for instructions. Changing the oil and filter by yourself isn’t a hard task if you follow the instructions. One of the easiest ways to protect your investment and maximize resale value is to ensure you keep up with all recommended maintenance, especially regular oil changes.
VISCOSITY GRADE
It is required 5W-30 for this engine as it is recommended by the manufacturer.
CAPACITY
2015 Nissan Versa with 1.6 L 4-cyl engine requires 3.7 quarts (with filter).
SPECIFICATION OF OIL
2015 Nissan Versa engine needs a special type of oil. The best choice for this specific car is the Genuine Nissan Engine Oil or SAE 5W-30 and API Certification Mark.
HIGH MILEAGE OIL FOR 2015 Nissan Versa
If you’re looking for a high mileage oil, check one of the most trusted brands Mobil 1 High Mileage full synthetic motor oil 5W-30 is a more environmentally friendly option for your 2015 Nissan Versa. With up to 10,000 miles between changes and an improved design that doesn’t use mineral oils like most cars do today—this product will keep you going strong on even the dirtiest roads.
2015 Nissan Versa Oil Change Intervals
Nissan recommends getting your 2015 Nissan Versa oil & filter changed every 3,000-5,000 miles for conventional oil. For those who use synthetic oil, the oil change intervals can be extended to 7,500-10,000 miles.
If your Nissan Versa is equipped with a maintenance minder system or trip computer, you’ll already know when it’s time for an oil change based on the number of miles you’ve driven since your last visit to the service center.
The service interval may also be displayed on the driver information display provided your Nissan Versa is equipped with a trip computer or maintenance minder system – it will have an oil change reminder that flashes when you need to get your Nissan Versa oil changed . If that doesn’t help, then you should check your owner’s manual and look at the vehicle maintenance schedule.
Best Oil for 2015 Nissan Versa
Oil plays such an integral part of how well any car operates; from removing harmful particles inside engine components which could damage them down further through wear-and tear or corrosion (not including dirt/road debris), keeping suspensions happy by preventing rusting). Picking the best oil is not an easy thing, but we’ve made some recommendations for you, to make this process easier for you.
Oil (by manufacturer) – Nissan recommends using Nissan Genuine Synthetic 5W-30 Motor Oil for 2015 Nissan Versa.
Oil (our choice) – Castrol Edge 5W-30 Advanced Full Synthetic Motor Oil for 2015 Nissan Versa is a high-tech motor oil. The safe and beneficial use of this product will provide a great performance after oil change.
Oil filter (by manufecturer) – If you are looking for which oil filter is perfect for your 2015 Nissan Versa then check out this Genuine Nissan Parts – Authentic Oil Filter.
How to Change Oil by Yourself – Step by Step
If you’re a happy owner of 2015 Nissan Versa, you might be bothered about its maintenance as it requires a lot of time and money. But in order for any car to perform at its best, it needs regular attention through things such as oil changes. In this article we will walk you through how to change your oil by yourself as save some time and money!
Step 1.
So we’re going to pop the hood first. It’s underneath the above the foot rests, pull that lever.
Then to release the safety, there’s a little lever here, push it to towards the passenger side of the vehicle, lift up and then there is a prop rod right here, lift up on that. Insert that that holds the hood up.
Now we’re gonna raise and support the vehicle, you can use the jack and jack stands.
Step 2.
The drain pan is located right here on this vehicle. It’s when you’re under the vehicle it is towards the right side when you’re looking towards the front of the vehicle. You don’t want to get it confused with the transmission pan.
This drain plug is a 14 millimeter bolt, we’re going to use a 14 millimeter wrench and remove it.
Loosen it up, twist it to the left.
Make sure you have a catch pan or drain pan. Pull it out.
So when we pull a drain plug up, there is a gasket right here or a seal. It’s a copper seal. It’s a good idea to replace this whenever you’re doing an oil change.
To get this gasket off, we’re just going to use a straight blade screwdriver, get underneath here. Twist up a little bit. Just go around, get that up a little bit you can almost unscrew it from the bowl.
Install the new one.
Now that our oil has drained out, we’re gonna reinstall the drain plug with our new gasket.
Don’t take our 14 millimeter wrench, snug it up. It is gonna crush that gasket as you do. Do not over torque it.
Step 3.
On the front of the engine is where the oil filter is located. We’re gonna use a strap wrench to try to take it off.
Once you get it spinning a little bit then you can do it by hand. Make sure you have your drain pan underneath to catch the oil.
Just let that drain out a little bit.
Take this filter off. Unscrew it and be careful when you get towards the end because you might drop it.
More oil is gonna come out. Pull it off and drain it out.
Step 4.
Take the new filter and before you install the filter up there, you’re going to take some fresh oil and you’re going to lubricate the seal on the oil filter. That will make it easier to remove next time and I’ll make it seem better when installing. Now before you put it up there you do want to check my old filter make sure the gasket is on the old filter.
Make sure didn’t get stuck up here to get stuck up here you will end up with a leak.
So now we’ll install the new filter. You know, line it up with the center threads of the filter housing and you’ll start tightening up, gets a little bit snuggling in a wipe it off for the rag. Get some oil off of there. And then you will try to tighten it pretty tight. Maybe another half turn. Just with hands and that’s it. You can wipe this off and you can wipe off the drain plug. Sure, it’s nice and clean if you had a little excess of the oil tripping you could take some brake parts cleaner and clean it off and wipe over the rag.
Step 5.
Now we’re gonna pull the filler cap we’re gonna set a sign and I mean the funnel.
And we’re going to add the oil you can find out what kind of oil your vehicle takes in the owner’s manual. This vehicle takes about the four quarts of oil.
So we’re going to add three and a half and then check it so we added our three and a half quarts oil, we’re going to pull the funnel out take the filler cap, no screw it back on.
Step 6.
Alright, we’re going to start the engine for about 15 seconds. So, we added our three and a half quarts of oil. We started the vehicle for about 15 seconds and we shut it off. We waited 10 minutes now we’re going to check the dipstick and see where oil level is.
First, we’re going to wipe the dipstick off insert the dipstick pull the dipstick out check the oil level and it should be right in between those hash marks.
Congrats with successful oil change!
