The Honda Pilot is a great car that has been around for many years. It can be pretty expensive to take it into the shop, so this article provides you with step-by-step instructions on how to change your oil by yourself.
The Honda Pilot has a recommended oil change frequency of 15,000 miles. If you want to save money on your next visit to the mechanic and want some confidence that you’re doing it right, this step-by-step guide will show you how to change the oil yourself in about 30 minutes or less. This way, you will have more financial freedom and not have to worry about making another trip back to the mechanic’s garage if something goes wrong.
2011 Honda Pilot Oil Change Guide [hide]
2011 Honda Pilot Oil Type
It is always better to check the owner’s guide for your 2011 Honda Pilot before changing oil. Changing oil by yourself is cheaper than paying for an oil change at the dealership or taking it to a mechanic. It will also help you understand your car better and get you more familiar with its maintenance schedule.
VISCOSITY GRADE
By the owner’s manual, the Honda Pilot will need premium-grade 5W-20 detergent oil with an API Certification seal on the container. Genuine Honda motor oil works best, but you can also use a different engine oil of the recommended viscosity.
CAPACITY
The Honda Pilot requires 4.3 liters (4.5 quarts) of SAE 5W-20 engine oil for a full change, and you should also consider rotating your tires as part if the routine maintenance on this vehicle to keep them at their best condition.
SPECIFICATION OF OIL
If you look into the 2011 Honda Pilot owner’s manual, it is recommended that you use premium-grade 5W-20 (preferably Genuine Honda Motor Oil) detergent oil with an API Certification Seal.
HIGH MILEAGE OIL FOR 2011 Honda Pilot
The next time you go for an oil change, make sure to use high-mileage motor oils like Mobil-1 High Mileage 5W20 full synthetic. This product offers peace of mind knowing that your engine will be protected even when maintenance is over 7,500-10,000 miles.
2011 Honda Pilot Oil Change Intervals
The recommended oil change interval for the 2011 Honda Pilot is every 7,500 miles or every year, whichever comes first.
So, if you are driving 7,500 miles per year or more, you should change your oil every 7,500 miles. If you are driving less than 7,500 miles per year (or one year), plan to change your oil at least once a year.
The owner’s manual only tells the driver when the last oil change was and when the next one is due in miles/km and oil type. Knowing when the last oil change was completed and how many miles/km were driven since your last oil change is important information to have before heading out to buy new motor oil. You will need this info so you can be sure to buy the proper viscosity (SAE 5W-20) motor oil. Knowing how many miles/km you’ve driven since your last oil change is also very important knowledge if the engine starts to run abnormally; you will know to immediately turn around and bring it in for service.
To save money and time, consider changing your oil yourself. This article will help you with that.
Best Oil for 2011 Honda Pilot
Many people are not aware of how to change oil in their car. Luckily, there is a handy blog post with step-by-step instructions on how to do it yourself. The 2011 Honda Pilot has an engine that makes it easy for just about anyone to learn how to change the oil themselves and save money!
Oil (by manufacturer) – Honda recommends using Genuine Honda Motor Oil. 2011 Honda Pilot uses 4 quarts of 5w-20 or 0w-20 weight motor oil which is a synthetic blend oil.
Oil (our choice) – Valvoline Full Synthetic Oil for 2011 Honda Pilot is safe to use. It can provide better gas mileage, engine protection and performance for your 2011 Honda Pilot engine.
Oil filter (by manufecturer) – If you are looking for which oil filter is perfect for your 2011 Honda Pilot then check out this Genuine Honda Oil Filter. This filter will maintain the life of your engine by blocking small particles from making their way through.
How to Change Oil by Yourself – Step by Step
Changing oil is a job that you can do yourself with the right tools. The process is straightforward and will save you money on costly maintenance visits. Below are step-by-step instructions for how to change your car’s oil in less than an hour.
Step 1.
This is everything we need to change the oil: you’re obviously going to need the oil, oil filter, you’re going to need a wrench to take the drain plug off use a 17 millimeter.
You’re going to need also a wrench to take the filter off. And this is just a socket and a ratchet.
You’re gonna need a drain pan, a couple of ramps, something to lay on a piece of cardboard and also some paper towels to clean up some of the mess. Okay, let’s do this. Drive a car up on the ramps.
We’re gonna get underneath.
Step 2.
Find the oil drain plug right here. Right next to it that’s your oil filter. Simple. Throw a wrench on it. Just try to bang that out. Put your pan here. Drain the oil.
We’ll put the plug back in.
Step 3.
And we’re gonna take the filter off. Once it’s loose with a wretch, you can just do by hand. Remamber, it’s going to drip.
Before you put the filter on, you want to lubricate that seal on top with the new oil.
We’re gonna put a filter on. The filter only gets put on hand tight.
Step 4.
Now we can pop the hood. To the front, you’re gonna see a dipstick, we’ll just stick right next to that.
You’re gonna have your cap for the fill.
Put in four and a half quarts. That’s what the owner’s manual calls for.
Step 5.
We drove it off the ramps and now we’re going to check the fluid level. Okay. Well you do that you take out your dipstick, you clean it, and you reinsert it. You take it out and check the level. The level should be between these two marks.
Okay, you don’t want to overfill it wouldn’t be good. Okay.
And you’re done. We hope this helped you out!
