Every car needs regular oil changes. But what’s the best 2007 Honda Civic oil change? This article will give you product reviews and useful tips on the 2007 honda civic oil change to help answer that question. With this comprehensive guide, you’ll be able to find the best 2007 honda civic oil change for your vehicle!
The 2007 honda civic oil change is an important maintenance procedure to keep your car running smoothly. Here in this article, you’ll find helpful reviews and tips on the 2007 honda civic oil change that are worth considering based on their various features. We hope these help!
2007 Honda Civic Oil Change [hide]
2007 Honda Civic Oil Type
The oil lubricates and cools the engine, cleans the internal parts, removes contaminants and in some cases might help extend the life of your car. Properly changing your car’s oil will remove old, contaminated oil and replace it with fresh, clean oil. As specified by your manufacturer, you should get an oil change at a regular interval, depending on the type of engine and weight of the oil. If your engine is leaking oil or burning more than it should, you may need to add oil in between changes. A low oil level will trigger your change-oil warning light and cause damage.
When you change your 2007 honda civic oil, it is important to know that the motor oil for 2007 Honda Civics with a 2007 honda civic engine are all temps and they use all oils in this range. Honda recommends that you change your oil after a year or when the maintenance light comes on.
Here a list of recommended motor oil types for the Honda Civic:
-
- For 2007 Honda Civic 2.0L 4-cyl use all temps 5W-30 motor oil.
-
- For 2007 Honda Civic 1.8L 4-cyl use all temps 5W-20 motor oil.
- For 2007 Honda Civic 1.3L 4-cyl use all temps 0W-20 motor oil.
So make sure you get an oil designed specifically for the type of fuel injection system or other specifications on your car before you change its oil!
2007 Honda Civic Oil Change Intervals
Honda recommends an oil change every 7,500 miles but much depends on your driving habits. If most of your driving is on the highway and your environmental conditions are not too harsh then you can get away with 5k miles intervals. If you do a lot of short stops, stop-and-go drives then go with 3k.
This is also a time-sensitive issue, so in the case of 3k mile intervals, maybe every 5 or 6 months.Some people will change their oil every 2,000 miles. There is no set answer for how often someone needs to change the oil in a car, because driving habits and environmental conditions are different.
Some people mistakenly believe that the factory maintenance schedule is always 100% accurate, but this is often not the case. These so-called experts also claim that automatic transmission fluid needs to be flushed every other decade, valve lash can go unlit without being inspected, and so on and so forth.
To help avoid oil sludge problems, follow the recommended guideline for your car’s make and model. This is also a problem with leased cars. Many people lease a car for 1, 2, or 3 years and have no intention of spending their money on a car they’ll turn into the leasing company in that period of time; the next “owner” winds up stuck paying for extensive unexpected maintenance.
According to experts, your Honda Civic needs an oil change every 7,500-10,000 miles. But these factors can cause oil break down and necessitate a repair before that next scheduled service date:
- Frequent off-road driving.
- Driving on dirt roads or in dust-laden terrain.
- If you use your truck frequently or commercially.
How to Check Oil 2007 Honda Civic
To keep your Honda Civic running smoothly and efficiently, regular car maintenance is required. One of the simplest and cheapest things that you can do to maintain a worry-free Honda Civic for years, is to check your oil on a regular basis. Failing to check your oil can lead to issues like dirty buildup and insufficient lubrication. If your engine was left with low levels of oil—for an extended period—it can cause irreparable damage. Thanks to the bright-colored handle found at the top of most dipsticks, checking one’s engine fluid level has never been easier!
All engines consume oil during operation. Regularly check your car’s engine and transmission fluids to make sure you are not running low, and change them if necessary.
Firstly, Checking the engine oil level in your car is important, so it should be checked on a regular interval, preferably when filling up with gas or before a long drive. Make sure the engine has reached its normal operating temperature first.
Second, Park the vehicle on a level surface, switch off the engine and wait for 3 minutes. Once parked, check if visible oil leaks around the oil fill plug or drain plug.
Thirdly, To check the oil level correctly, remove the dipstick and wipe it clean. Insert the dipstick fully into its slot for a reading.
Fourthly, Hold the dipstick horizontally to prevent oil from running up or down as you read off the level.
Finally, The level of oil should be between the markings “MAX” and “MIN” on the dipstick. When the car is close to running out of oil, or too much less oil present compared to other levels in the engine, you will need to top-up and refill the allotted amount of oils The on the dipstick tells you that your car contains approximately 1 liter of oil, more than enough to get through a typical day’s driving.
2007 Honda Civic Oil Change
Honda recommends changing your oil after the light on the dashboard comes on, or one year later, whichever is first.
Tools You will Need
- Hydraulic jacks and jack stands
- 17 mm box end wrench
- 5W-30 engine oil (4 quarts)
- Funnel
- Oil drain plug gasket
- Oil drain pan
- Oil filter wrench
- Rags
- Engine flush
- Engine restore
Step 1 – Start the engine and jack up the car
When working underneath your vehicle, ensure the engine is warm so you can suspend any contaminants in old oil and clean the points of access. Once the engine has reached an appropriate temperature and all components are clean, turn it off before moving to other steps.
- Jacking up your car starts by pulling the parking brake. Thoroughly secure the nose of a jack under a point where two pieces of metal meet on the frame’s perimeter, which is also called the pinch weld.
- Lever the jack until you have enough room to work comfortably under the car. Place a jack stand (a small piece of equipment that props up the car) against one side of the car, behind where you will be working under. Carefully lower the car onto it, making sure not to shift its position on top of your other jack and leave space for your hydraulic floor jack next to it for safety. Repeat these steps with the driver’s side of the car before moving back into your seat again.
NOTE: Find instructions for lifting your car in your owner’s manual, and pay special attention to how to jack the car under each wheel.
Step 2 – Drain the old oil
Start by removing the oil cap on top of the engine. This will help allow any old oil to completely drain. Next, turn around to find a 17 mm hex plug found underneath your car (closer to the engine than the transmission). Loosen this plug by hand 3/4 of a turn and seal with an open-end wrench before loosening it all together. Then pour out any liquids that are inside into your designated container when complete
NOTE: Check for shiny specks in the oil. If you see metal flakes, then your machine’s internals are probably damaged.
Step 3 – Clean the oil drain plug and replace gasket
- When the oil is about to stop draining, wipe off the drain plug with a clean rag. Loosen and remove the old gasket from around the drain plug before applying a new one. Wipe away any excess oil in that area when finished. Apply a light coat of pure engine oil onto the threads of the drain plug so it seals properly again.
- Finally, tighten up the nut on your wrench for extra security by turning it clockwise until you just hear an audible “click” noise or feel resistance if using an electric impact wrench to secure it against its surroundings tightly enough so that no liquids can leak through while driving.
NOTE: You can use a torque wrench to verify that the plug is tightened to its correct specification.
Step 4 – Lower the car and replace oil filter
Jack the car up with a hydraulic jack. Remove the car stand, then slowly lower it to the floor.
- To replace the oil filter, first locate it. On the firewall side of your engine block, half way down is where the oil filter is located.
- Next use an oil filter wrench to undo and remove the old one by rotating clockwise.
- Before installing a new one again, put it around a rubber ring and threads with fresh engine oil for better sealing so that leaks do not happen in future.
- Install a new one carefully and tighten it as much as you can without stripping any of the threading.
Step 5 – Pour in the new oil
- Insert the funnel into the filter cap to prevent spilling. Pour 4 quarts of engine oil (preferably full-synthetic) into the funnel; then remove surrounding filler caps and pour in new engine oil. Check for system lubrication and level.
How To Reset Oil Life On a Honda Civic
It’s normal for the Honda Civic oil warning light to flash after an oil change, although it should stop flashing once you learn how to reset your car. If your Honda Civic is still showing the oil light after an oil change has been performed, or if you’re curious about any of your vehicle’s electrical systems, here are a few simple steps to perform a reset:
- Turn the ignition to ON without starting the engine and confirm that you have it in your dashboard.
- Turn on left-hand-side steering wheel controls and press Menu to see vehicle information, scroll with (+) until choosing vehicle information appears on the menu screen, then press SOURCE button.
- Press the SOURCE button once more to go to the maintenance screen.
- Now you should see engine oil life displayed on your i-MID (intelligent Multi Information Display).
- Use the (-) to choose Yes. Press SOURCE then turn off the ignition and restart the engine. Wait five minutes before starting again.
We hope we helped you understand how to service your 2007 Honda Civic!
Remember: You should always consult your vehicle manual first before taking any action.
