Oil is an essential part of your car, and changing the oil is important to keep it running smoothly. Do you know how to change oil by yourself? It is not difficult at all with the right tools and a step-by-step guide. This blog post will show you everything you need to know about the process of changing the oil in your Hyundai Tucson. If you are not sure how to do this or don’t have time for a full service visit, our step-by-step instructions will walk you through everything you need to know about changing your own oil.
2018 Hyundai Tucson Oil Change Guide [hide]
2018 Hyundai Tucson Oil Type
Don’t forget to check the owner’s manual for your 2018 Hyundai Tucson to make sure how often you should change your engine oil. The owner’s manual will also provide you with information about the type of oil recommended for your vehicle, as well as any additional oil-change considerations for this particular model.
VISCOSITY GRADE
The 2018 Hyundai Tucson mostly requires synthetic motor oil SAE 5W-20 for all temp, though it varies from your weather conditions and how often you drive the car. And the oil capacity varies by engine.
CAPACITY
The 2018 Hyundai Tucson 2.0 L 4-cyl requires 4.2 quarts of motor oil with the new filter.
SPECIFICATION OF OIL
Hyundai recommends Quaker State’s Full Synthetic motor oil. It is designed to protect today’s sophisticated engines such as modern turbocharged ones. The company has been the preferred aftermarket supplier in for Hyundai vehicles and one of their main reasons was because they believed Quakers’ brand had more than 100 years experience built on durability. No doubt it is a high quality product.
HIGH MILEAGE OIL FOR 2018 Hyundai Tucson
If you need high mileage oil for your 2018 Hyundai Tucson, choose Mobil 1 High Mileage full synthetic motor oil.
2018 Hyundai Tucson Oil Change Intervals
Vehicle maintenance is important to keep your vehicle in good, running condition. Oil changes are one of the most critical parts because they can affect how well a car performs on an obstacle course or participate with other vehicles around you – so don’t forget!
The recommended interval for an oil change depends upon several things including driver habits, climate conditions and fuel quality. But changing oil and filter every 3-5 thousand miles is recommended by Hyundai.
Best Oil for 2018 Hyundai Tucson
If you are wondering which oil is best for your Hyundai Sonata, here are this year’s suggested specifications, according to the owner manual.
Oil (by manufacturer) – Hyundai recommends using Quaker State Motor Oil, Synthetic Blend 5W-20 2018 Hyundai Tucson uses synthetic blend oil.
Oil (our choice) – Pennzoil – Ultra Platinum Full Synthetic 5W-20 Motor Oil for 2018 Hyundai Tucson is safe to use. It can provide better gas mileage, engine protection and performance for your Tucson engine.
Oil filter (by manufecturer) – If you are looking for which oil filter is perfect for your 2018 Hyundai Tucson then check out this HYUNDAI Genuine Oil Filter.
How to Change Oil by Yourself – Step by Step
Changing your car’s oil is a necessary maintenance task, but it can be daunting if you’ve never done it before. If you have a 2018 Hyundai Tucson, this step-by-step guide will make the process easy. Follow these simple instructions to get the job done quickly and easily.
Step 1.
You’re doing an oil change on a 2018 Hyundai Tucson it’s should be a pretty easy job. Only need a couple little hand tools in a drain pan and some fresh oil.
Let’s jump into this and get this thing done. Get the car jacked up, we come underneath it. And you can kind of see through there, there’s the filter, but it’s all covered with this plastic stuff. We have eight of these little 10 mil bolts all around. Once you get these eight out, then you can get to the drain plug.
Have the access panel off. There’s the drain plug. Near is the oil filter. should be Get the drain pan underneath. Let it drain out. Put the drain plug back in. Good and tight.
Step 2.
Get your old filter out using the wretch.
Step 3.
Stick the drain plug in torque to spec aka good and tight, and then, new filters put on is torque that by hand. Use a glove or something that helps getting a little bit extra traction on it. Tighten it down. Now we’re going to put this panel back on and fill it up with an oil.
Step 4.
Check the level. Make sure everything’s good no leaks. Clean everything up. After let it warm up for a little bit. We got about four quarts in it for pull the dipstick out and check make sure level is good. We’re also gonna keep an eye on it a little bit more.
